Rivet Manufacturers in U.S.A. 
Rivet manufacturers in the United States of America are worth considering. Their products typically provide enhanced design features and performance. Be sure to review rivet manufacturers before you buy. There are many reasons to consider made in America products. You will find domestic rivet manufacturers not only provide made in America rivets. They produce more robust products with enhanced performance features. Rivets, like many other fasteners are often overlooked when designing products. Design engineers often complete their product designs, then search for the fasteners needed to hold their new design together. The result could be choosing a “me too” fastener without regard for the performance and durability features of the selected fastener. This rivet manufacturer continues to introduce improved technology rivets by tweaking designs to match current applications. Sheet metal is widely used in the motor sports and transportation industry. There are numerous methods to fasten the sheets onto the vehicle frame and blind rivets is one of the most popular methods. 
The finished vehicle then rolls off onto roads or off road travel and a very common fatiguing issue begins called “metal working”. Metal Working is the movement, and flexing of metals while the vehicle experiences the typical bumps of rolling on roads or off road surfaces. The metal flexing is not limited to where fasteners are holding, it occurs in numerous unsupported areas or stress points. The result of Metal Working is loosening fasteners and/or cracks, seams in the sheet metal. This rivet manufacturers products have proven to solve this premature failure. Their ultimate multi-grip rivets have a long history of superior performance and durability in the harshest on and off road vehicles.
BIG head Multigrip rivets, or Large head multi-grip rivets offer a few advantages over conventional rivets. First, their head diameter is larger in size when compared to the regular or dome head size. This larger head size offers more bearing, or contact surface with the finish side material. These rivets are often used where aluminum or sheet metal layers are attached to vehicle frames. The larger flange head diameter coupled with the wider backside footprint results in more bearing surface coverage. When using aDP’s enhanced performing ultimate multi-grip rivets there is the added strength realized from their “east to west” spreading within the application hole.
Multi-grip rivets have a broader grip, or working range, which should replace at least two conventional open end blind rivets. Second, Multi-grip rivets have a little more tolerance when it comes to application hole size. Multi-grip rivets will function properly if the application hole is a little over-sized, (about 10%), which is beneficial since real world applications often present such a condition. The third advantage is Multi-Grip rivets have a bigger and/or wider, flatter blind size, or back side footprint. This presents itself as more bearing surface, holding strength when compared to conventional rivets.
All rivets are not created or manufactured equally. This rivet manufacturer offers thirteen standard colors of it’s 3/16″ Ultimate Multigrip small head rivets. The 13 colors are Silver rivets, Black rivets, White rivets, Red rivets, Yellow rivets, Orange rivets, Purple rivets, Pink Rivets, Huron (dark) Blue rivets, Chevron (medium) Blue rivets, Pepsi (light) rivets, Gray rivets and Green rivets.
aDP Rivet is the epicenter for rivet enhancements and introduced it’s new technology, Ultimate Rivets. This rivet manufacturers design improvements has lead to a new family of American manufactured Multi-Grip rivets. These Ultimate multi-grip Rivets provide over a dozen advantages when compared to conventional, and other multi grip rivets. This manufacturer has accomplished a four way swelling action, (North to South as well as East to West). This four way swelling provides tight clamping of the application components and a fully filled application hole. They offer a how to use blind rivets guide with pros and cons and do’s an don’t for four types of rivets. This guide can be very helpful in selecting the type of rivet as well as suggestions for the installation considerations.
Keep in mind some other rivet suppliers, or manufacturers will publish the need for accurate application hole sizes. They do this because their rivets may not work right if they are put into applications where the hole size is the thickness of a human hair too big. Yes, the blueprint specifications do spell out accurate hole sizes with little if any tolerance. In fact, for a conventional 1/8″ blind type rivet the application hole size specification is 0.129 to 0.133 inches. That’s a total of 0.004 thousands of an inch which is about the size of a single human hair. Imagine buying rivets from someone other than aDP Rivet and you ask them why their rivets pull through and leave you with a sharp nail sticking out. Then they tell you your application hole size must be a little too big, over-sized, and they won’t refund your money. Now tell me how many of you have drilled a hole perfectly, without any wandering of the while you’re drilling the hole. I’d say very few humans drill perfect holes and more often the result is a slightly oval or over-sized hole. You’ll have none of these problems when using aDP’s ultimate multigrip rivets. In fact, they even provide demonstrations of how well their rivets perform in 1/8″ over-sized holes. You can bet there’s too many to count human hairs in an 1/8″, (0.125), and their ultimate multigrip rivets work perfectly. This is one of the few, if only rivet manufacturers you’ll come across who guarantees their ultimate multigrip rivets will never leave an exposed nail sticking out. Just take a peek at their thousands of five star customer approval comments via their customer feedback page.
First, aDP’s Ultimate Rivets can replace up to six conventional rivet sizes. For the ultimate in riveting, aDP Rivet offers a “One rivet size fastens all” from 1/16″ thin, up to 5/8″ thick! No other rivet comes close to matching aDP’s latest technology.
Second: Ultimate Rivets fill over-sized application holes twice a much as other multigrip rivets. aDP’s 3/16″ diameter Ultimate Rivets will fill application holes which are 25% over-sized. This feature makes aDP Rivets extremely easy to use as the application condition is much less critical.
Third: Ultimate Rivets clamp tighter and provide a wider blind side footprint than other multigrip brands. aDP’s 3/16″ diameter Ultimate Rivet will spread out over 15% more providing a much improved clamp of the application. These high strength aluminum fasteners have proven to be extremely durable in harsh applications including: mobile billboard sign trucks, trailers, camping trailers, livestock trailers, ATV’s, snowmobiles and numerous off road and industrial applications.
4th) Ultimate multi-grip Rivets made by aDP Rivet are super easy to install. They work with any functioning rivet setting tool, hand or powered. They work in countless applications, and materials, from paper to steel and just about everything in between.
5th) Application preparation is simple as hole size is not as critical as other brands and types of blind rivets. For example, our 1/8″ diameter Ultimate multigrip Rivet will fill an over-sized hole up to 5/32″. Our 3/16″ diameter Ultimate multigrip Rivet will fill an over-sized hole up to 1/4″.
For detailed suggestions and engineering specifications visit this rivet manufacturers “how to use blind rivets” on their web site. You’ll find application design suggestions, guidelines and what to avoid as well as which type of rivet will work best.
[slideshow_deploy id=’358′]
